Thread

Connectors of series 1-3 are produced with both male thread and female thread. All of our threads, meaning the entire line of threaded items including sealing collars, are guaranteed to be produced with no seams. The thread lengths of male threads meet the requirements of the applicable standard. The tolerances of thread standards are designed for metal threads and cannot be applied to plastic threads.

Our connectors and fittings can be equipped with the following threads:

PIPE THREAD DIN ISO 228 BSP NPT THREAD ANSI/ASME B 1.20.1 METRIC ISO THREAD DIN 13 UNF THREAD ANSI/ASME B 1.1
G 1/16“ NPT 1/8“ M 5 N 10 - 32 UNF
G 1/8“ NPT 1/4“ M 6 N 1/4“ - 28 UNF
G 1/4“ NPT 3/8“ M 8 N 7/16“ - 20 UNF
G 3/8“ NPT 1/2“ M 10 x 1 N 9/16“ - 18 UNF
G 1/2“ NPT 3/4“ M 10 x 1,5 N 5/8“ - 18 UNF
G 5/8“ NPT 1 M 12 x 1,5 N 1/2“ - 20 UNF
G 3/4“ M 14 x 1,5
G 1 M 16 x 1,5
M 18 x 1,5
M 20 x 1,5

Other thread sizes available on request.

Cylindrical thread: G, M or UNF

Cylindrical thread: G, M or UNF

For optimum assembly of a connector, tightening must be limited by a defined stop. Our G, M and UNF threads provide this option. Sealing is ensured by the sealing collar. In special cases the sealing can be supplemented by an O-ring.

Conical thread: NPT

Conical thread: NPT

The seal of the NPT thread is provided in the thread itself rather than by a sealing collar.

Dead volume free connection

Dead volume free connection

In order to exclude unwanted dead volume, emtechnik has developed a type of screw connection with a cylindrical G thread that seals via a cone (outer cone). The prerequisite is that the internal thread also has the same cone (internal cone).

Please note: Generally speaking, however, each type of thread should only ever be connected with the same type of thread. For example if you are using a male connector with a male G-thread, the mating part should always have a female G-thread. The conical male thread in a cylindrical female thread shown in the drawing clearly illustrates that it is not possible in this case to produce a tight-fitting and therefore tight connection.